LK 583 is a water meter coupling for tapwater.
The gauge block is not designed for permanent installation and must be replaced with a water meter when the incoming tapwater supply is connected.
The water meter coupling has a sliding coupling to the meter.
Installation of the compression fitting is facilitated if lubricant is applied to the thread and chamfer. Tighten manually as far as possible, then use a fixed wrench. Tightening, number of turns with wrench plus other technical data, please see separate data sheet for Compression fittings. Soft pipes are fitted with support sleeves.
Note: The ball valves must be thread-sealed during installation.
The water meter unit requires no maintenance. The installation should be checked regularly..