Loc-filter-Filtration-3L

• Loc-filter-Filtration-3L
• Retrofit
• Compatible Housing That Use 1401 Style Cartridges
• Flow Rates
• High
• Efficiency
• High Filtration Efficiency

1401 – FULFLO® 1401 PLEATED CARTRIDGEGeneral Cartridges

High efficiency, flow rate, dirt holding capacity & high pressure pleated cartridges. Fulflo™ 1401 cartridges are designed to replace similar competitive cartridges in high pressure water injection & disposal, gas streams and fluid processing. The cartridges are available in cellulosic and polypropylene media. Fulflo™ 1401s are available in absolute ratings of 2.5, 6, 10, 12, 22, and 100 microns (ß = 5000, 99.98%). Typical applications include water injection, solvents, acids, chemicals, hydrocarbons and water.SEE PRODUCT

• Efficiency
• High Flow Rate Eeduces Processing Time
• Safety
• USP Class VI 121°C Plastics Test
• Pore Sizes
• 0.04, 0.1, 0.2, 0.45, 0.65 and 0.8µm

263 – CLARIFLOW® GENERAL GRADE CARTRIDGEGeneral Cartridges

Hydrophilic Polyethersulfone (PES) membrane for aqueous liquid filtration applications. Clariflow® General Grade cartridges are designed for general-purpose use in the filtration of high-purity liquids and aqueous chemicals. The mirrored-anisotropic Polyethersulfone (PES) membrane is inherently hydrophilic and has a pore morphology that delivers exceptionally high flow rates. Because there are no added surfactants or wetting agents, and the support layers and structure are all-polypropylene, the filter exhibits low extractables, broad chemical compatibility and good resistance to hydrolysis. The Clariflow® General Grade cartridge is available in 0.04, 0.1, 0.2, 0.45, 0.65 and 0.8µm pore sizes. Typical applications include chemical filtration, liquid clarification, recirculating fluids, general use water filtration and deionized water systems.SEE PRODUCT

• Reliablity
• Reliable and Cost-Effective
• Pressure
• High Flow Rate / Low Differential Pressure
• Safety
• USP Class VI 121°C Plastics Test

266 – CLARIFLOW® WS CARTRIDGEGeneral Cartridges

Hydrophilic Polyethersulfone (PES) membrane for cost-effective purification. Clariflow® WS cartridges are cost-effective alternatives to Clariflow® Electronics and General grade cartridges for the filtration of a variety of aqueous liquids. The Clariflow® WS cartridge is built around a unique polyethersulfone (PES) membrane that is inherently hydrophilic, and contains no added surfactants or wetting agents. As such, it is known for clean filtrates, and also offers competitive flow rates, extended service life, and excellent resistance to hydrolysis. Clariflow® WS cartridges are fabricated under cleanroom conditions. The Clariflow® WS cartridge is available in 0.04, 0.1, 0.2, 0.45, and 0.65µm cartridges. Typical applications include deionized water filtration, chemical filtration, liquid clarification, recirculating liquids, wine and beer clarification, juices and bottled water.SEE PRODUCT

• Safety
• USP Class VI 121°C Plastics Test
• Pore Sizes
• 0.05, 0.1, 0.2, 0.45, 1 and 100µm
• Temperature Process
• 150°C, and Ozonated and/or Hot UPW

331 – FLUOROFLOW® CARTRIDGEGeneral Cartridges

All-fluoropolymer cartridge for effective filtration of aggressive chemicals. Fluoroflow® pleated filter cartridges feature an all-fluoropolymer construction; this provides the highest chemical resistance when filtering acids, bases and solvents. Fluoroflow® cartridges fit standard filter housings and are available in a variety of filter ratings, lengths and end-fittings for maximum versatility. Fluoroflow® cartridges are available flushed with UPW to minimize extractables and wet-packed to eliminate the need for on-site wetting, to fit your needs. The Fluorflow® cartridge is available in 0.05, 0.1, 0.2, 0.45, 1 and 100µm pore sizes. Typical applications include aggressive chemicals and process fluids at temperatures up to 150°C, and ozonated and/or hot UPW.SEE PRODUCT

• Retrofit
• Use 3″ OD x 36″ Long SOE Cartridges With Spring
• Filter Efficiency
• High
• Surface Area
• High

336 – FULFLO® 336 PLEATED CARTRIDGEGeneral Cartridges

Pleated cartridge construction improves filtration efficiency, dirt holding capacity and flow rates. Fulflo® Pleated 336 size filter cartridges provide highly efficient removal of solid contaminants from a variety of petrochemical, refinery and oilfield applications. Cartridges are manufactured from premium grade phenolic impregnated cellulose and polypropylene blown media. These structures provide superior removal efficiency. The cartridges are available in 3µ, 10µ, 12µ, 22µ, and 100µ pore sizes. (99.98% removal; ß = 5000). Typical applications include petrochemical, refineries, oil fields, produced water, amines and glycols.SEE PRODUCT

• Safety
• USP Class VI 121°C Plastics Test
• Flow Rates
• Reliable Air and Liquid Flow Rates for Effective Performance
• Quality
• Integrity Tested to Ensure Quality

354 – PROFLOW™ II GENERAL GRADE CARTRIDGEGeneral Cartridges

Hydrophobic PTFE membrane for general purpose gas and solvent purification. Proflow™ II General grade cartridges provide an economic alternative for general applications where reliable gas and liquid flow rates are required. With 5.6 square feet of expanded PTFE membrane, Proflow II-G is a highly efficient hydrophobic barrier, for the production of dry gas, and will effectively purify aggressive liquids and organic solvents. Proflow™ II-G cartridges are manufactured under cleanroom conditions and integrity tested before shipment to assure consistent performance and quality. Typical applications include photoresists, compressed gas, venting, electronic grade solvents and hot deionized water (less than 80°C).SEE PRODUCT

• Lift Capacity
• 25 tons
• Welding Methods
• GMAW, SMAW, SAW and GTAW
• Capabilities
• Design and Manufacture Skids and Packages

3L FILTERS™ NUCLEAR OVERVIEWNuclear Products

3L Filters™ has exceeded the most demanding nuclear filtration requirements for over 40 years. We design and manufacture products for nuclear applications in PWR, BWR and PHWR nuclear reactors. A broad range of standard and custom products includes cartridge filters, strainers, demineralizers, recombiners, separators, pressure vessels and engineered systems. Our nuclear quality program complies with ASME NQA-1, 10 CFR 50 Appendix B, ANSI N45.2, 10 CFR Part 21 and CSA N285.0.SEE PRODUCT

• Certification
• ASME Section VIII Div. 1
• Options
• Valves, Pressure Gauges, Site Glass
• Inlet/Outlet Nozzles
• 150lb ANSI RF flanged

ACF – ACTIVATED CARBON FILTEREngineered Products and Packages

The ACF Series Activated Carbon Filter removes dissolved organics from liquid streams by adsorption. Typical uses include removal of chlorine, dissolved organics, hydrocarbons and chlorinated hydrocarbons in water treatment systems, as well as removal of acids in amine treatment systems.SEE PRODUCT

• Safety
• USP Class VI-121°C Plastic Test
• Material
• Materials Listed As Acceptable for Potable and Edible Contact According to CFR Title 21
• Construction
• Pure Polypropylene

AVS – AVASAN™ FILTER CARTRIDGEGeneral Cartridges

High purity melt blown depth cartridges. AVASAN™ (AVS) cartridges are manufactured with a proprietary melt blown manufacturing process using a specially formulated polypropylene polymer. This formulation provides a uniquely graded density filter cartridge designed for high purity applications. The fiber matrix of the cartridge has been engineered to provide structural integrity throughout the long service life of the cartridge and the finish-free construction provides optimum fluid purity and eliminates foaming. AVASAN’s inherent fluid compatibility properties plus graded density make it the economical filter choice for high clarity requirements. Typical applications include DI water, RO prefiltration, potable water, plating solutions and chemical processing fluids.SEE PRODUCT

• Arrangement
• Single, Duplex or Multiplex
• Housing
• Carbon Steel Standard
• Standard Design Pressure
• 150 psig

BF – MULTI BAG FILTER HOUSINGHousing

The BF Series Multi Bag Filter Housing provides economical bulk filtration for liquids such as paints, inks, coolants, water, solvents, glues, recycled oils and beverages. The BF is sized from 3 to 24 bags and accommodates replaceable filter bags to remove particulates down to 1 micron.SEE PRODUCT

• Arrangment
• Single, Duplex or Multiplex
• Design Pressure
• Up To 3000 psig
• Certification
• ASME Section VIII Div.1

BSF – FABRICATED BASKET STRAINERHousing

The BSF Series Fabricated Basket Strainer removes gross particles from a liquid stream. Often used as a pre-filter placed before finishing filtration equipment, the BSF is ideal for removing large amounts of solid matter from liquids such as water, coolants, resins, adhesives, solvents, paints and inks. A removable stainless steel basket allows easy cleaning and quick change out when heavy particle loading is present.SEE PRODUCT

• Thru-Bolt
• Suitable For Any Temperature or Pressure
• Swing-Bolt
• Suitable Up to 200°F (93°C)
• Enclosure
• Easy Access Enclosure

CLOSURESHousing

3L Filters™ offers three closure options to suit a broad range of industries and process conditions. 3L Filters™ closures are designed to save time when opening and closing.SEE PRODUCT

• Strength
• Rigid Cage Design
• Configurations
• Industry Standard
• Manufacturing
• Strict Quality Control

CP – CLARIPOR™ FILTER CARTRIDGEGeneral Cartridges

Polypropylene pleated depth media for critical process applications. The best of pleated and depth style technologies combine in the Claripor™ pleated depth filter cartridges. The unique layered construction provides absolute retention with high flow rates and excellent gel removal. These features, in addition to Claripor™’s high contaminant holding capacity and exceptional clarifying ability, make it an ideal choice for a wide array of critical process applications. Claripor™ cartridges are available with polypropylene media in absolute (99.98%) micron ratings from 0.5 to 90 microns. Typical applications include critical coatings, inkjet inks and specialty chemicals.SEE PRODUCT

• Flow Rate
• 1, 5, 10 and 25 Micron Filters
• Fuel Cleanliness
• ISO 4401 code 18/16/13
• Compatibility
• Compatible with Biodiesel Blends

CP – COALESCER FILTERIndustrial Cartridges

The CP industrial coalescer filters are manufactured using a cellulose particulate capture media and a resin impregnated glass fiber coalescing core (no metal core). This unique combination of media provides the industry with one of the most efficient particulate and water removal filters available. In addition to high efficiency, the CP filter can provide the customer with low initial pressure drop and longer life when compared with competitor products. These filters remove free and emulsified water and solid contamination from various types of fuels and hydrocarbon fluids. The 1, 5, 10 and 25 micron filters ensure fuel quality that meets or exceeds the fuel cleanliness requirements of the Worldwide Fuel Charter (ISO 4401 code 18/16/13), when challenged with ASTM Type A3 test dust. Typical applications include refineries with process streams, finished product, petrochemical plants, petrochemical storage and distribution systems, and at the point of consumption. Note: Part number CP-20452-J meets MIL-PRF-52308J requirements under NSN 4330-01-477-7985.SEE PRODUCT

• Material
• 316 Stainless Steel or Carbon Steel
• Finish
• Phonographic Finish
• Custom
• Custom Builds Available

CS & BS – CONE & BASKET STRAINERGeneral Cartridges

CS & BS Series Cone & Basket Strainers are used to protect fluid and gas handling equipment by removing debris during system start-up. They are easily installed or placed between large flange faces without modifying the surrounding pipe work, and are also easily removable.SEE PRODUCT

• Ratings
• 1µm, 3µm, 5µm, 10µm, 25µm, 50µm, 75µm and 100µm
• Certifications
• ANSI/NSF61
• Materials and Construction
• FDA listed

DBC – FULFLO® DURABOND™ CARTRIDGEGeneral Cartridges

Economical filtration with high strength thermally bonded depth cartridges. Fulflo® DuraBond™ cartridges are the most economical high strength filter cartridges available. Featuring an integral rigid thermally bonded construction, the DuraBond™ provides consistent filtration for a wide variety of fluids. Its fixed pore structure acts as a sieve-like particle “classification” filter for pigmented coatings allowing pigments to pass while stopping large agglomerates. Fulflo® DuraBond™ cartridges are available in nominal ratings of 1µm, 3µm, 5µm, 10µm, 25µm, 50µm, 75µm and 100µm. Typical applications include photographic chemicals, DI water, plating solutions, bleach, RO prefiltration, organic solvents, oilfield fluids, membrane prefiltration, industrial coatings, magnetic coatings, potable water and processing fluids.SEE PRODUCT

• Ratings
• 1µm, 5µm, 10µm, 25 µm and 50µm
• Certified
• ANSI/NSF61
• Materials
• FDA Listed

EBC – FULFLO® ECOBOND™ FILTER CARTRIDGEGeneral Cartridges

High purity filtration with low cost melt blown depth cartridges. Fulflo® EcoBond™ cartridges are the most economical high purity filter cartridges available. Featuring a graded density matrix of uniform polypropylene fibers, the EcoBond™ provides consistent filtration for a wide variety of fluids. No fiber finish or surfactants are present to generate extractables leading to foaming or other undesirable effects on the filtrate. Fulflo® EcoBond™ cartridges are available in nominal ratings of 1µm, 5µm, 10µm, 25 µm and 50µm. Typical applications include photographic chemicals, DI water, plating solutions, RO prefiltration, membrane prefiltration, organic solvents, oilfield fluids, bleach, potable water and chemical processing fluids.SEE PRODUCT

• Design Codes
• ASME, RCCM
• Stamps
• ASME stamps N, NPT, U, U2, UM
• Materials
• Carbon Steel and Austenitic Alloys Construction

EMERGENCY CORE COOLING STRAINERS FOR NUCLEAR APPLICATIONSNuclear Products

Emergency Core Cooling (ECC) strainers provide protection for the reactor emergency core coolant pump and containment spray system pump under LOCA conditions. ECC strainers are used to capture the large amount of pipe insulation and other debris that is dislodged in the event of LOCA. They are designed to guarantee low head loss in order for the pump to continue operation. ECC strainers are customized for installation in an existing plant with minimal changes to plant infrastructure. Thermon Heating Systems ECC strainers are tested per GSI-191 guidelines.SEE PRODUCT

• Design Codes
• ASME, RCCM
• Stamps
• ASME stamps N, NPT, U, U2, UM
• Construction
• Carbon Steel and Austenitic Alloys Construction

ENGINEERED MODULE SYSTEMSNuclear Products

Thermon Heating Systems designs, manufactures and tests custom engineered module systems. These systems typically consist of process equipment supplied by Thermon Heating Systems or other vendors. Module systems are supplied complete with all interconnecting piping, instrumentation and controls. Modules are fully tested and seismically-qualified where required. These systems are supplied as turnkey systems, ready for site installation and operation.SEE PRODUCT

• Design
• Pressure Vessel Design
• Capacity
• 25 Ton Lift Capacity
• Analysis
• Stress Analysis, Seismic Analysis and Design Registration

ENGINEERED PRODUCTS & SKID PACKAGESEngineered Products and Packages

3L Filters™ has designed, manufactured and tested a wide variety of custom-engineered products and complete skid-mounted systems. 3L Filters™ has special expertise in liquid filtration systems for nuclear, petrochemical, water treatment and environmental applications. Our experienced engineering team has created systems for a multitude of markets and customers. We apply our in-house talents to accommodate all aspects of design, from piping and structural to instrumentation and PLC programming. Systems can be designed to meet ASME codes, seismic requirements and military specifications as required. With designs on file from hundreds of successful applications, 3L Filters™ can provide a custom-engineered system that is guaranteed to perform to the customer’s specifications.SEE PRODUCT

• Certifcation
• ASME Section VIII Div.1
• Pressure
• Custom Design Pressures Up to 3000 psig
• Temperature Range
• -20°F/+200°F (-29°C/+93°C)

F & FD – LUBE OIL, SEAL OIL & CONTROL OIL CARTRIDGE FILTER HOUSINGHousing

The F & FD Series Cartridge Filter Housings provide continuous particulate filtration for both critical and non-critical lube, seal and control oil applications. Many standard F & FD systems conform to API 614 requirements for system components, including the filters and transfer valves, as well as the required controls and instrumentation. F & FD Series Housings are ideal across a wide range of applications, including: turbine, machine tool and lube oil console manufacturing; mining gear lube oil, transformer oil and heat transfer oil filtration; oil recycling; hydraulic systems and other rotating equipment such as compressors and motors.SEE PRODUCT

• Flow Rates
• 25 gpm/95 lpm or up to 75 gpm/230 lpm
• Typical Applications
• Jet Fuel, Aviation Gas, Diesel Fuel, Gasoline, Kerosene

FBO FILTER ASSEMBLYIndustrial Cartridges

FBO-10 and FBO-14 filter assemblies are designed to meet the toughest hydrocarbon refueling conditions and provide for ease of filter change outs. The FBO Assembly can flow 25 gpm/95 lpm or up to 75 gpm/230 lpm depending on the model, the elements installed and fuel being filtered. The FBO assembly can be used on mobile refuelers or installed in refueling cabinets. The unit can also be used for diesel fuel dispensing pumps or as a primary fuel filter/water separator for large diesel engines or as bulk fuel handling, fuel transfer, and other higher flow applications. Typical applications include jet fuel, aviation gas, diesel fuel, gasoline, kerosene, JP4, JP5 and JP8. Typical installations include aviation fuel trucks, aviation fueling cabinets, diesel fuel dispensing systems, marine fuel docks and fuel systems on large diesel engines. These versatile housings have three filter options to meet various requirements: a fuel filter/water separator, a silicone treated filter, and a water absorber. For fuel dispensing applications the fuel filter/water separator filter is recommended.SEE PRODUCT

• Design Pressure
• Up to 3000 psig
• Temperature
• -20°F/+150°F (-29°C/+66°C)
• Arrangement
• Single, Duplex or Multiplex

FC – SINGLE BAG FILTER HOUSINGEngineered Products and Packages

The FC Series Single Bag Filter Housing provides effective, economical filtration of liquids such as paints, inks, coolants, water, solvents, glues, recycled oils and beverages. Disposable filter bags are available in a wide range of materials and micron ratings to remove particulate matter down to 1 micron.SEE PRODUCT

• Standard
• 7×18 or 7×19 Cartridges
• Applications
• Kerosene, Gasoline, Diesel fuels, and Industrial Lubricating, Hydraulic and Insulating Oils
• Safety
• No Internal Metal Parts to Corrode

FCC CLAY CANISTERS & FCCB CLAY BAGSIndustrial Cartridges

Clay bags and canisters are especially important in the removal of surfactants from jet fuels. Surfactants or surface acting agents and fuel additives are often injected at various points of fuel distribution. These surfactants and additives must be removed before the fuel flows through the filter/separator or they will disarm the coalescer element. Clay canisters (FCC) and clay bags (FCB) are constructed with the finest Georgia Attapulgus clay and use maximum media surface area to offer outstanding clay media filtration. This construction offers maximum water resistance and absorption capabilities. This combination provides maximum protection for downstream coalescer elements, which are so important in jet fuel and other fuel filtration. Our clay bags and canisters are designed to fit standard industry vessels where 7 x 18 or 7 x 19 cartridges are used. Sturdy bail or strap handles assist maintenance personnel during change-outs. Our construction minimizes shipping damage and media settling during transit. Clay canisters and bags are also specified for surfactant removal from kerosene, gasoline, diesel fuels, and industrial lubricating, hydraulic and insulating oils.SEE PRODUCT

• Certification
• Class 1, Div 1, Group D Hazardous Locations
• Heating
• Heats Gas Indirectly to Required Degree
• Stream
• Scrubs Liquids From the Gas Stream

FGCS – FUEL GAS CONDITIONING SYSTEMEngineered Products and Packages

Fuel Gas Conditioning Systems remove small amounts of moisture, liquid mist, and particulate contaminants from fuel gases. Capabilities include gas preheating and pressure reduction as required by specification. Gas metering is also available. The FGCS prepares the fuel (natural) gas for use in gas turbines, gas furnaces, gas burners, etc. It is typically used by gas turbine manufacturers, combined cycle power plants, natural gas turbine installations, gas fired furnaces, and small off-shore and on-shore power generators. A variety of Fuel Gas Conditioning System configurations are available to match the specific needs of different applications.SEE PRODUCT

• Maintenance
• Quick Maintenance and Reduced Radiation Exposure
• Access
• Remote Access to Vessel Cover and Media
• Equipment
• Same Equipment Can Be Used for Different Operating Parameters

FILTER CARTRIDGES & FILTER BASKETS FOR NUCLEAR APPLICATIONSNuclear Products

Thermon Heating Systems nuclear filters incorporate high efficiency cartridges which provide optimum dirt holding capacity and low pressure drop. Filtering media is carefully selected to suit the specific nuclear application. A filter vessel may contain a single cartridge or a filter basket incorporating multiple cartridges. Cartridges and baskets have extraction couplings allowing remote handling using special tools. Cartridges are designed for either incineration or crushing to reduce disposal volume.SEE PRODUCT

• Design Codes
• ASME, RCCM
• Stamps
• ASME stamps N, NPT, U, U2, UM
• Requirements
• Meets Appropriate Jurisdictional Requirement

FILTER DEMINERALIZERS FOR NUCLEAR APPLICATIONSNuclear Products

Filter demineralizers are used to remove dissolved radionuclides from condensate water, reactor coolant water and fuel pool water. Filter demineralizers are an alternative to deep bed ion exchange columns in applications where the dissolved ion concentration is low. A filter demineralizer is a filter equipped with special septa over which a specially-formulated powdered resin is pre-coated. As the contaminated water flows through the precoat, both the ion exchange and filtration processes occur in one step.SEE PRODUCT

• Design Codes
• ASME, RCCM
• Stamps
• ASME Stamps N, NPT, U, U2, UM
• Quality Control
• Seismically Evaluated and Qualified

FILTERS FOR NUCLEAR APPLICATIONSNuclear Products

Filters are used to remove fine suspended particles from fluid streams. Thermon Heating Systems supplies liquid filters for nuclear plant applications such as: reactor coolant, coolant water make-up, condensate treatment, steam generator blow down, spent fuel pool water clean-up, radwaste clean-up, laundry rinse clean-up, pump seal injection and filters for control rod drive mechanisms and other applications. Filters in radioactive environments are designed for remote operation. Covers are equipped with gear box operators. Thermon Heating Systems uses captive bolts that remain on the cover and do not fall when the cover is removed. The cover seal gasket is incorporated into the filter cartridge or filter basket, eliminating the need for a separate cover gasket. Filters from Thermon Heating Systems are designed with advanced filter media that provide optimum filtration efficiency, dirt holding capacity and pressure drop. Filters are qualified for radioactive environments and are available with micron ratings from as low as 0.1 micron up to 100 micron.SEE PRODUCT

• Pressures
• Up to 250 psig
• Flow Rates
• 1 to 150 SCFM
• Inlet/Outlet Ports
• 1/4″ (6.35mm) or 3/4″ (19.05mm) NPT

FLODRI – COMPRESSED GAS SCRUBBING SYSTEMEngineered Products and Packages

The FLO-DRI Compressed Gas Scrubbing System is designed for gas conditioning of fuel gas from natural gas wells at the point of use to remove aerosols, contaminants, H2S, moisture, oil and solids. This process eliminates the costly down time associated with instrument and catalytic heater failure caused by the presence of these substances. The system is engineered for long life, featuring easy cartridge change out, low pressure drop, low maintenance and low cost operation.SEE PRODUCT

• Certification
• ASME Section VIII Div. 1 and API Bulletin 1581
• Temperature
• 20°F/+160°F (-29°C/+71°C)
• Inlet/Outlet Nozzles
• 150lb ANSI RF Flanged

FM – FUEL MONITOREngineered Products and Packages

The FM Series Fuel Monitor provides clean, dry fuel as the final point of filtration in aviation fueling systems. An increase in differential pressure across the unit or a corresponding decrease in flow rate indicates water and/or dirt is present in the influent fuel.SEE PRODUCT

• Design
• Pleated Cartridge
• Temperatures
• Up to 250°F (121°C)
• Pressure
• Up to 100 psid

FP – FULFLO® FLO-PAC® FILTER CARTRIDGEGeneral Cartridges

Superior industrial filtration from a pleated cartridge design. Fulflo® Flo-Pac® cartridges are the perfect choice for many industrial filtration requirements. Flo-Pac® pleated cartridges contain premium grade, phenolic impregnated cellulosic filter media. This line of pleated cartridges is designed for critical filtration applications, providing long service life, high flow rate and low pressure drop. Flo-Pac® Pleated Cartridges are available in 0.5µm, 1µm, 5µm, 10µm, 20µm, 30µm, and 60µm pore sizes (95% removal; ß = 20). Typical applications include water soluble, coolants, quench oils, fuels, lubricating oils, hydraulic oils, EDM dielectrics, rolling mill oils, processing liquids and gasoline.SEE PRODUCT

• Filter Ratings
• 1 to 25 Microns
• Type of Seals and Gaskets
• Viton® Seals and Gaskets
• Engine Requirements
• OEM and World Fuel Charter

FP SERIES PLEATED PAPER MICROFILTERIndustrial Cartridges

The industrial FP pleated paper microfilters utilize proven and established cellulose media technology providing end users with low cost, effective and efficient dirt removal. FP microfilters are typically employed in bulk fuel distribution systems to protect and prolong the life of water removal coalescers. With filter ratings from 1 to 25 microns, FP filters can be used to remove particulate contamination in traditional diesel fuel, mixtures of biodiesel and other petroleum distillates. FP microfilters are not API/EI qualified for use in airports for jet fuel filtration. FP microfilters are designed for particulate removal and are installed to protect expensive downstream coalescer filters and system components. These filters are available in many configurations to suit a wide variety of applications and can fit many competitor vessels. FP microfilters improve fuel cleanliness and can provide fuel quality to meet engine OEM and World Fuel Charter requirements.SEE PRODUCT

• Design
• Pleated Cartridge
• Temperature
• Up to 250°F (121°C)
• pH Range
• pH 4-10

FPE – FULFLO® FLO-PAC® PLUS FILTER CARTRIDGEGeneral Cartridges

Special construction for organic solvent filtration. Fulflo® Flo-Pac® Plus Cartridges are the filters of choice for many industrial filtration requirements. Flo-Pac® Plus Pleated Cartridges are manufactured with premium grade, phenolic impregnated cellulosic filter media for long service life, high flow rate and low pressure drop. Unique epoxy resin bonding of end caps, pleat side seal and gaskets provides excellent resistance to most organic solvents. Flo-Pac® Plus Pleated Cartridges are available in 0.5µm, 1µm, 5µm, 10µm, 20µm, 30µm, and 60µm pore sizes (95% removal; ß = 20). Typical applications include: aromatic hydrocarbons (toluene, xylene, benzene); ketones (acetone, isophorone, methylethyl ketone); ethers (THF, dioxane); amines (DEA, TEA, DMEA); glycols (ethyl acetate, cellosolve acetate); aliphatic hydrocarbons (hexane, pentane, naphtha); halogenated hydrocarbons (methylene chloride, perchloroethylene); esters (EG, PEG, DEG).SEE PRODUCT

• Design Codes
• ASME, RCCM
• Stamps
• ASME Stamps N, NPT, U, U2, UM
• Material
• Carbon Steel and Austenitic Alloys Construction

FUEL GAS CONDITIONING SYSTEMS FOR NUCLEAR PRODUCTSNuclear Products

Fuel gas conditioning skids are used upstream of natural gas turbines which are used in auxiliary or emergency power generation units. Fuel gas conditioning skids remove contaminants and water moisture from the natural gas and provide appropriate heating to inhibit formation of hydrates that severely affect turbine performance.SEE PRODUCT

• Removal Rating
• 90% efficiency from 0.5µm to 150µm Range
• Certification
• ANSI/NSF61
• Options
• O-Ring and End Cap

FULFLO® HONEYCOMB™ FILTER CARTRIDGEGeneral Cartridges

Multipurpose filtration solutions with wound depth cartridges. Wound cartridges provide true depth filtration utilizing hundreds of tapered filtering passages of controlled size and shape. Each layer of roving contributes to true depth filtration by trapping its share of particles. Wound cartridges offer a gradual pressure increase during cartridge life versus surface-type media that have an abrupt flow cutoff when loaded. In addition, the irregular outer layer reduces surface blinding, assuring both longer cartridge life and full cartridge utilization. Ultrafine cartridges are a unique member of the Honeycomb™ wound depth cartridge family. They are specifically designed for critical filtration applications in the 0.5µm range. When absolute 0.5µm filtration is required, the nominal Ultrafine cartridge can be used as a prefilter, thereby significantly extending membrane life. Ultrafine cartridges remove 90% of particles larger than 0.5µm in size. This type of filtration provides excellent protection for equipment or processes that must be protected from fine particles. Effective removal ratings at nominal 90% efficiency from 0.5µm to 150µm range. Typical applications include oxidizing agents, alkalies, potable liquids, dilute acids and alkalies, mineral acids, organic acids and solvents, petroleum oils, photo solutions, amines, water and prefiltration for membranes.SEE PRODUCT

• Certification
• ASME Section VIII Div. 1
• Arrangement
• Single, Duplex, Multiplex
• Housings
• Stainless Steel / Custom Housing

FW – GENERAL INDUSTRIAL CARTRIDGE FILTER HOUSINGHousing

The FW Series Cartridge Filter Housing for general industrial applications removes particulates from liquid streams, often as a pre-filter ahead of finer particle separation equipment. The standard design is based upon the single or double open-ended cartridge, but can be adapted to many filter cartridge designs, configurations and sizes. The FW is ideal in applications across a wide range of processing industries, including food and beverage, pharmaceutical, semi-conductor, chemical plants, water treatment and remediation.SEE PRODUCT

• Micron Rating
• 1 to 25
• Removal Efficiency
• 15 ppm
• Biodiesel Compatible
• =B20

FW SERIES HYDROCARBON WATER ABSORBING FILTERIndustrial Cartridges

FW series filters remove particulate contamination down to one micron and free or emulsified water from hydrocarbon fluids. These filters utilize the latest technology in filtration and include multiple layers of protection including a super-absorbent layer to collect, trap and prevent water from passing downstream and to ensure the fuel is clean and dry. The FW series is compatible with most fuels, including biodiesel blends up to B20 and are typically used at refineries with process streams, on finished product at petrochemical plants, through the petrochemical storage and distribution systems, and at the point of consumption. FW series filters can be used in the FBO filter assemblies which are available for both mobile and marine applications. FBO -10 and FBO -14 are mobile application assemblies and FBO-10-MA and FBO-14-MA are marine application assemblies.SEE PRODUCT

• Certification
• ASME Section VIII Div. 1
• Standar Temperature
• -20°F/+150°F (-29°C/+66°C)
• Arrangement
• Single, Duplex or Multiplex

GAS FILTER SEPARATOREngineered Products and Packages

The GFS Series Gas Filter Separator removes moisture, liquid mists, aerosol and contaminants from hydrocarbon gases, including natural gas, propane, butane and methane, using a three-stage design. The first stage removes gross water by impingement on cartridge stools. The second stage coalesces water using cartridges, with particulate removal down to 0.5 micron. During the third stage, a stainless steel vane mist eliminator removes any remaining moisture. Water collects in the sump to be purged from the system, and clean, dry gas passes through the outlet. The GFS is ideal for use in a wide range of applications, including chemical/petrochemical/natural gas plants, pipelines, refineries, compressor and metering/regulation stations, and power generation plants.SEE PRODUCT

HEADLIFTSHousing

All 3L Filters™ products are designed for ease of maintenance and quick access to replace bags, cartridges, canisters and filter packs. 3L Filters™ has a variety of standard and optional headlifts for specific vessel designs. Let us help you select the optimal headlift to suit your operational requirements.SEE PRODUCT

• Certification
• ASME Section VIII Div. 1 and API Bulletin 1581
• Pressure
• 150 psig
• Temperature
• -20°F/+150°F (-29°C/+66°C)

HV – LIQUID FILTER SEPARATOR (TWO STAGE HORIZONTAL)Engineered Products and Packages

The HV Series Liquid Filter Separator provides water coalescing and filtration of hydrocarbon fuels such as jet fuel, kerosene, diesel, gasoline and similar liquids. The HV’s horizontal layout and two-stage design effectively removes particulate from fuel and provides quick and convenient access for cartridge replacement. Units can be engineered for either fixed or mobile applications.SEE PRODUCT

• Design Codes
• ASME III, RCCM
• Stamps
• ASME Stamps N, NPT, U, UM
• Quality Control
• Produced Under Rigorous Quality Control

HYDROGEN RECOMBINERS FOR NUCLEAR APPLICATIONSNuclear Products

Hydrogen is released into the nuclear plant containment area under LOCA conditions. In the longer term under normal operation, radiolysis and corrosion can also increase hydrogen levels to the extent that a potentially explosive mixture of hydrogen and air could be present. To mitigate hydrogen concentration, passive catalytic recombiners are installed in the containment. Recombiners use a catalyst made of porous material treated with metals such as platinum and palladium. The catalyst provides sites where hydrogen and oxygen atoms from air come into close vicinity and chemically react to form water, thus reducing hydrogen concentration.SEE PRODUCT

• Design Codes
• ASME, RCCM
• Stamps
• ASME Stamps N, NPT, U, U2, UM
• Delivery
• Better Control of Quality and On Time Delivery

ION EXCHANGE COLUMNS FOR NUCLEAR APPLICATIONSNuclear Products

Ion exchange columns are used to remove dissolved radionuclides from boiler condensate water, reactor coolant water and fuel pool water. They use cation, anion or mixed bed resins. The resin exchanges undesirable ions present in water with harmless ions. Thermon Heating Systems ion exchange columns use a built-in flow distributor for maximizing bed efficiency and have built-in resin retention screens.SEE PRODUCT

• Certification
• ASME Section VIII Div. 1
• Tempertature
• -20°F/+150°F (-29°C/+66°C)
• Pressure
• 150 psig

L – DEHYDRATOREngineered Products and Packages

The L Series Dehydrator provides gross water removal from liquid hydrocarbon fuels such as aviation fuel, kerosene, gasoline, diesel and liquid propane to an efficiency of 99%. It employs a variety of replaceable coalescent filter packs to trap particle contamination and coalesce water from the fuel. Free water is collected in a drainage sump.SEE PRODUCT

• Certification
• ASME Section VIII Div. 1 and API Bulletin 1581
• Temperature
• -20°F/+150°F (-29°C/+66°C)
• Nozzles
• 150lb ANSI RF Flanged

LIQUID FILTER SEPARATOR (TWO STAGE VERTICAL)Engineered Products and Packages

The VV Series Liquid Filter Separator provides water coalescing and filtration of hydrocarbon fuels, such as jet fuel, kerosene, diesel, gasoline and similar liquids. The VV’s vertical two stage design combines coalescer and separator cartridges based on flow and product, as well as providing quick and convenient cartridge replacement access.SEE PRODUCT

• Ratings
• 1µm, 3µm, 5µm, 10µm, 15µm, 20µm, 30µm, 40µm, 70µm, 90µm and 120µm
• Type
• Depth Cartridge
• Title
• CFR Title 21

MBP – FULFLO® MEGABOND PLUS™ CARTRIDGEGeneral Cartridges

Depth Cartridges with high dirt holding capacity & absolute rated filtration efficiency. Fulflo® MegaBond Plus™ are absolute rated depth cartridges. Using a new innovative manufacturing process, the MBP has higher dirt holding capacities offering long service life and without contaminant migration. The MBP has a fixed core inner structure of thermally bonded continuous microfine polypropylene fibers. The outer layer fixed pore structure has been modified to maximize the graded density surface area to enhance dirt holding capacity. Fulflo® MegaBond Plus™ cartridges are available in absolute (ß = 5000) ratings of 1µm, 3µm, 5µm, 10µm, 15µm, 20µm, 30µm, 40µm, 70µm, 90µm and 120µm. Typical applications include photographics, high technology coatings, DI water, plating solutions, chemical processing and membrane prefiltration.SEE PRODUCT

• Flow Rates
• Up to 3,325 gpm (12,586 lpm)
• Ratings
• 0.5, 1, 5 and 10 micro
• Design
• High Surface Area Pleated

MCN – FULFLO® MEGAFLOW™ FILTER CARTRIDGEGeneral Cartridges

High flow capacity pleated filter cartridges. Fulflo® MegaFlow™ cartridges provide a cost effective alternative to wound and other 2 1/2″ OD style filter cartridges in high flow applications such as reverse osmosis pre-filtration and similar applications where nominal efficiency is sufficient. Each MegaFlow™ cartridge can handle flow rates up to 175 gpm (662 lpm), significantly reducing the number of cartridges required and the housing size. Each 6″ (152 mm) diameter MegaFlow™ cartridge has flow capacity equal to 8 standard 2 1/2″ OD x 40″ long filter cartridges. Positive o-ring seals and a built in handle make cartridge installation reliable, fast and easy. MegaFlow™ cartridges are available in either pleated polypropylene or cellulose media with nominal ratings of 0.5, 1, 5 and 10 micron. Typical applications include potable water, waste water, reverse osmosis pre-filtration, lubricating oil and coolants.SEE PRODUCT

• Flow Rates
• Up to 3,325 gpm (12,586 lpm)
• Absolute Range
• 1 µm to 150 µm
• FDA Regulations
• CFR Title 21

MFA – FULFLO® MEGAFLOW™ PLUS FILTER CARTRIDGEGeneral Cartridges

Absolute rated, high flow capacity, pleated filter cartridges. Fulflo® MegaFlow™ Plus cartridges are ideally suited for high flow applications where absolute particle removal is required. Each MegaFlow™ Plus cartridge can handle flow rates up to 175 gpm (662 lpm), significantly reducing the number of cartridges required, as well as the housing size. Each 6″ (152 mm) diameter MegaFlow™ Plus cartridge has flow capacity equal to 8 standard 21/2″ OD x 40″ long cartridges. Positive o-ring seals and a built in handle make cartridge installation reliable, fast and easy. MegaFlow™ Plus cartridges are available with pleated polypropylene media for use in a wide variety of fluids. Absolute ratings range from 1 µm to 150 µm. Typical applications include potable water, vegetable oil, wastewater, lubricants, food & beverage and coolants.SEE PRODUCT

• Material
• 316 Stainless Steel or Carbon Steel

MP – ORIFICE (METERING) PLATE TOOLTool

An orifice meter is a device used to measure the rate of fluid flow in a pipe. Fluid flows through a pipe at a certain velocity and pressure. When the fluid reaches the orifice plate, it converges and is forced through the small hole of the plate, altering the flow rate.SEE PRODUCT

MXG – FULFLO® MAXGUARD™ FILTER CARTRIDGEGeneral Cartridges

MaxGuard™ high capacity cartridge. The MaxGuard™ high capacity cartridge product line provides a cost effective alternative to bag media or standard 21/2″ cartridges for high flow applications. Each MaxGuard™ cartridge has a 6″ nominal outside diameter and can handle flows up to 90 gpm, significantly reducing the number of cartridges required for large flow applications. MaxGuard™ cartridges are available in polypropylene, cellulose and Nomex™ media. All cartridges feature an industry standard 226 positive O-ring seal and easy-to-grasp integrated handle. Typical applications include deep well injection, amines, commercial water and food & beverage.SEE PRODUCT

• Construction Materials
• CFR Title 21
• Absolute Ratings
• 99.98%; ß = 5000
• Pore Sizes
• 0.2µm, 0.45µm, 1µm, 2µm, 5µm, 10µm, 20µm, 40µm, and 70µm

PAB – FULFLO® ABSO-MATE™ CARTRIDGE

Absolute, cost-effective filtration from all polyproylene cartridges. Fulflo® Abso-Mate™ cartridges provide the ultimate in economical filtration for even the most critical process fluids. The proprietary melt blown media are rigidly controlled for reliable results time after time. Abso-Mate™ cartridges are produced without adhesives that can potentially contaminate fluids. Abso-Mate™ Pleated Cartridges are available in 0.2µm, 0.45µm, 1µm, 2µm, 5µm, 10µm, 20µm, 40µm, and 70µm absolute rated pore sizes. Typical applications include membrane prefiltration, chemicals, catalyst recovery, precious metal recovery and waste water.SEE PRODUCT

• Contact Listing
• CFR Title 21
• Formats
• Poly-Mate™ Plus, Poly-Mate™ and Claripor™
• Range
• Majority of Housing Requirements

PB – FULFLO® PLEATED BAG SERIESGeneral Cartridges

High quality, consistent filtration performance. The Fulflo® Pleated Bag (PB) series is a high-capacity product line that provides a cost-effective alternative with higher removal efficiencies over standard bag media configurations. Utilizing a unique “Select” pleat design along with proprietary media configurations, we are able to optimize the pleat pack surface area to maximize the service life within each configuration. The Fulflo® PBs are available in several polypropylene formats: Poly-Mate™ Plus, Poly-Mate™ and Claripor™. In addition, it is available with our Glass-Mate™ media. This product is designed to fit within existing bag filter vessels without any hardware changes, and incorporates an easy to grasp integrated handle for quick removal. Typical applications include intermediates & fine chemicals, amines, commercial water, deep well injection, catalyst recovery, vegetable oils, and paints & inks.SEE PRODUCT

• Types
• 2µm, 3µm, 10µm, 30µm and 60µm pore sizes (99%+ removal: ß = 100)
• Typical Applications
• Chemical, Process Gas, Oil Field, Petroleum
• Types
• Premium Pleated Cellulosic

PCC – FULFLO® PCC (PLEATED CELLULOSIC) CARTRIDGEGeneral Cartridges

Unique cartridge construction improves particle retention, service life and flow rates. Fulflo® Pleated Cellulosic Cartridges meet a broad range of critical filtration applications. Each cartridge in the Fulflo® Pleated cellulosic series is manufactured with premium grade, phenolic impregnated, cellulosic filter media. Phenolic resin locks the cellulosic fibers into a rigid, porous matrix. This structure provides superior particle removal and particle retention performance under the most severe conditions. Fulflo® Pleated Cartridges are available in 2µm, 3µm, 10µm, 30µm and 60µm pore sizes (99%+ removal: ß = 100). Typical applications include chemical, process gas, oil field, petroleum, photographic, coatings, paint, film & paper, ink & resins, metal treatment, process water, synthetic fibers and recording media.SEE PRODUCT

PM & PXD – FULFLO® POLY-MATE™ FILTER CARTRIDGEGeneral Cartridges

Quality, economical filtration for critical process applications. Poly-Mate™ cartridges incorporate a unique combination of polypropylene melt blown and spunbonded media to provide high surface area, finish-free and non-fiber releasing filtration. All-polypropylene construction maximizes chemical resistance to acids, bases, salts, and most organic solvents. Poly-Mate™ pleated cartridges are available in 0.5µm, 1µm, 5µm, 10µm, 30µm, and 60µm pore sizes (99% removal; ß = 100). Typical applications include disposal wells, photographic, wastewater, high technology coatings, RO membrane prefiltration, plating chemicals, fine chemicals, process water, deionized water.SEE PRODUCT

• Pore Sizes
• 0.45, 1, 2, 3, 5, 10, 20 and 40µm
• Safety
• USP Class VI-121°C Plastic Tests
• Typical Applications
• Chemicals, Coatings, Water and RO Prefiltration

PMG – GLASS-MATE™ PLUS CARTRIDGEGeneral Cartridges

Absolute and economical filtration with pleated microfiberglass cartridges. Glass-Mate™ cartridges offer an economical choice for absolute-rated efficiency, high flow rate capability and long service life. A wide variety of construction components, end fittings and seal options make this product line ideal for prefiltration and point-of-use filtration for many industrial applications. Glass-Mate™ cartridges are available in 0.45, 1, 2, 3, 5, 10, 20 and 40µm absolute-rated pore sizes. Typical applications include chemicals, coatings, water and RO prefiltration.SEE PRODUCT

• Pore Sizes
• 0.25µm, 0.45µm, 0.8µm, 2.0µm, 3.0µm, 5.0µm, 30.0µm, 50.0µm, 100.0µm
• Material Certification
• FR Title 21
• Typical Applications
• DI Water, Process Water, Magnetic Media, Plating Chemicals and Membrane Prefiltration

PMP – FULFLO® POLY-MATE™ PLUS CARTRIDGEGeneral Cartridges

High surface area and high efficiency all-polypropylene pleated cartridges. Fulflo® Poly-Mate™ Plus cartridges, made of pleated polypropylene microfiber, provide high efficiency and high purity filtration. The high efficiency of the Poly-Mate™ Plus line makes it an ideal membrane prefilter or cost-effective alternative to membrane cartridges in a wide range of applications. Poly-Mate™ Plus pleated cartridges are available in the following pore sizes (nominal rating at 90%): 0.25µm, 0.45µm, 0.8µm, 2.0µm, 3.0µm, 5.0µm, 30.0µm, 50.0µm, 100.0µm Typical applications include DI water, process water, magnetic media, plating chemicals and membrane prefiltration.SEE PRODUCT

• Material
• Carbon Steel, Stainless Steel, Aluminum
• In-House
• Machining, Blasting, Painting
• Diameter
• Maximum Diameter is 14 ft. (back door is 15ft.)

PRESSURE VESSELSHousing

3L Filters™ has over 40 years of experience in the design and fabrication of tanks and pressure vessels. Our engineering group can perform complete stress and seismic analysis and design registration. 3L Filters™ has registered Quality Assurance Programs for nuclear and non-nuclear applications. In addition to tanks and pressure vessels, other applications include boiler shells and filter housings for most uses. 3L Filters™ has special expertise for nuclear, oil and gas, pertrochemical, water treatment and environmental applications.SEE PRODUCT

• Design Codes
• ASME, RCCM
• Configuration
• Vertical or Horizontal
• Materials
• Material-SS, CS and Others

PRESSURE VESSELS & TANKSNuclear Products

Thermon Heating Systems designs and manufactures pressure vessel and tanks for process systems and liquid storage. These can be supplied in carbon steel, stainless steel and other alloys. Tanks and pressure vessel are designed to ASME pressure vessel code and seismically analyzed as per plant specific requirements. These units can be supplied in various sizes, pressure and temperature conditions.SEE PRODUCT

• Pore Sizes
• 2µm, 5µm, 10µm, 25µm, 50µm, 75µm, 125µm and 150µm
• O-Ring Type
• 222 o-ring with flat cap
• Pressure
• 150 psid

PRO – FULFLO® PROBOND™ FILTER CARTRIDGEGeneral Cartridges

A patented breakthrough in resin bonded cartridge design. ProBond™ cartridges have a unique, proprietary two-stage filtration design to maximize particle retention and service life in viscous fluid filtration applications. An outer, spiral, prefilter wrap, made from a fiber blend of polyester and acrylic, increases cartridge strength and eliminates residual debris associated with conventional or machined and grooved, resin bonded cartridges. ProBond™ filter cartridges are available in eight differentiated removal ratings of 2µm, 5µm, 10µm, 25µm, 50µm, 75µm, 125µm and 150µm pore sizes to meet a wide range of performance requirements. Typical applications include paints, plasticizers, printing inks, waxes, adhesives, oilfield fluids, resins, process water, emulsions, petroleum products, chemical coatings and organic solvents.SEE PRODUCT

• Materials
• 316 Stainless Steel or Carbon Steel
• Metal
• 14 gauge perforated

PS – PLATE STRAINER TOOLTool

Plate strainers are used to protect fluid and gas handling equipment by removing debris during the start-up of a system. These are easily installed or placed between large flange faces without modifying the surrounding pipe work, and are easily removed.SEE PRODUCT

• Qualification
• Seismically Evaluated and Qualified
• Manufacturing
• Designed and Manufactured in One Location
• Material
• Carbon Steel and Austenitic Alloys Construction

RADIOACTIVE MATERIAL TRANSPORTATION PACKAGENuclear Products

Thermon Heating Systems supplies packages for the transportation of radioactive material. The annulus between the concentric cylinders is filled with foam that provides protection to the inner cylinder in case of severe impacts.SEE PRODUCT

RCP & RMG – FULFLO® PARMAX™ FILTER CARTRIDGEGeneral Cartridges

Large-diameter high-flow elements. The best of pleated and large diameter technologies are combined in the ParMax™ high flow filter cartridges. ParMax™ cartridges are available with polypropylene and microfiberglass media in absolute (99.98%) ratings from 1 to 90 micron. The unique layered construction provides excellent retention across a wide range of flux rates. One 6″ diameter cartridge can handle up to 500 gpm flow (60″ length). The inside-to-outside flow allows for a high contaminant holding capacity. High flow and a long filter life make the ParMax™ an ideal choice for a wide variety of critical process applications. Typical applications include process water, water, spirits and food & beverage.SEE PRODUCT

• Certification
• ASME Section VIII Div. 1
• Valves
• Shut-offs, Transfer, 2-Way or 3-Way
• Gauges
• Liquid Level Gauges, Switches & Transmitters

REPLACEMENT PARTS & ACCESSORIESParts and Accessories

To ensure peak performance of 3L Filters™ equipment, use only certified 3L Filters™ original quality replacement parts and accessories. Standard parts are usually available from our stock. Custom parts are fabricated quickly and accurately from our drawings, and are designed to ASME Section VIII Div. 1.SEE PRODUCT

• Design Codes
• ASME, RCCM
• Stamps
• ASME Stamps N, NPT, U, U2, UM
• Material
• Carbon Steel and Austenitic Alloys Construction

RESTRICTION ORIFICES & FLOW ELEMENTS FOR NUCLEAR APPLICATIONSNuclear Products

There are many uses for restriction orifices in nuclear plants. Their main purpose is to reduce downstream pressure. Depending upon the degree of pressure reduction, single-stage or multi-stage orifices are used. Flow elements are used for precise measurement of flow. Thermon Heating Systems supplies precision machined restriction orifices and flow elements that provide 1% accuracy. These units are manufactured from corrosion and abrasion-resistant material to maintain accuracy for the life of the plant.SEE PRODUCT

• Design Codes
• ASME, RCCM
• Stamps
• ASME Stamps N, NPT, U, U2, UM
• Material
• Carbon Steel and Austenitic Alloys Construction

SEPARATORS FOR NUCLEAR APPLICATIONSNuclear Products

Process waste water gets contaminated with leakage of lubrication oil or coolants used in machinery. Oils must be removed prior to discharging the spent water into the sewer system. Thermon Heating Systems oil water separators use mechanical impingement and coalescing media to strip the oil from water. These systems can also be supplied with acid/base metered injection to neutralize the pH of the water.SEE PRODUCT

• Operating Temperatures
• 1100°F (593°C) for NPTF
• Pressure
• 300 psi
• Material
• 304 and 316 Stainless Steel

SSF – STAINLESS RECLEANABLE FILTERGeneral Cartridges

SSF – Stainless Recleanable Filter 3L Filters™ stainless recleanable filters provide effective filtration for gasses and fluids in high temperature and flow rate applications. 3L Filters™ recleanable filters are available in flat wrap or pleated format and offer flexibility in particle removal ratings, size choices and end cap configurations. The SSF Series is ideal for a variety of applications, including aggressive gasses, catalyst recovery, caustic cleaning solutions, corrosive fluids, heat transfer fluids, high temperature applications, mot melt processes, hot wax, polymer filtration, process steam and viscous fluids.SEE PRODUCT

• Design Codes
• ASME, RCCM
• Stamps
• ASME Stamps N, NPT, U, U2, UM
• Construction
• Carbon Steel and Austenitic Alloys Construction

STRAINERS FOR NUCLEAR APPLICATIONSNuclear Products

Strainers are used to remove coarse suspended particles from fluid systems. Thermon Heating Systems supplies strainers for capturing resin fines from deep bed ion exchange columns, up-stream strainers to protect pumps and other hydraulic rotating machinery and strainers for miscellaneous applications. The broad product line includes: cast Y strainers, fabricated Tee strainers, in-line strainers, blow down strainers and duplex strainers. Strainer baskets are manufactured using either perforated stainless sheets or, for finer straining, wire mesh sandwiched between perforated sheets for strength. Baskets are designed for high rupture pressure.SEE PRODUCT

• Certified
• ANSI/NSF61
• Material
• 316 Stainless Steel and 304 Stainless Steel
• Pore Rating
• 1µm to 100µ

SWC – FULFLO® STRING WOUND FILTER CARTRIDGEGeneral Cartridges

Economical filtration solutions with string wound depth cartridges. The SWC Filter Cartridge offers a wide range of fibers and core materials. Roving is wound onto a center core for strength. The diagonal pattern of the media forms a tight, interlocking weave. Nominal removal ratings from 1µm to 100µm are available. Typical applications include water, alkalies, dilute acids and alkalies, organic acids and solvents, potable liquids, petroleum oils, mineral acids, and as a prefilter for RO membranes.SEE PRODUCT

• Design Codes
• ASME, RCCM
• Stamps
• ASME Stamps N, NPT, U, U2, UM
• Construction
• Carbon Steel and Austenitic Alloys Construction

VAPOR RECOVERY DRYERS FOR NUCLEAR APPLICATIONSNuclear Products

Vapor recovery dryers are designed to remove moisture from air in the reactor building. In a CANDU reactor, they remove heavy water. Moist air is passed through a tower containing moisture-absorbing desiccant. Dry air is exhausted into the building. The desiccant is regenerated using hot, dry air. Both single and dual tower dryers are available.SEE PRODUCT

• Certification
• ASME Section VIII Div. 1
• Pressure
• 150 psig
• Nozzles
• 150lb ANSI RF flanged

VC – CLAY TREATEREngineered Products and Packages

The VC Series Clay Treater provides removal of surfactants from liquid hydrocarbon fuels, as well as removal of acids or oxidation products from lubrication or hydraulic oils. It is commonly installed upstream of filter separators to remove surfactants that can disarm filter separators. The VC uses clay canister filtration media to absorb surfactants, often as a pre-filter.SEE PRODUCT

• Certification
• ASME Section VIII Div. 1
• Arrangement
• Single, Duplex or Multiplex
• Temperature
• -20°F/+150°F (-29°C/+66°C)

VF – AVIATION AND PETROLEUM CARTRIDGE FILTER HOUSINGEngineered Products and Packages

The VF Series Cartridge Filter Housing for aviation and petroleum applications uses specific pleated or depth media cartridges to remove particles as small as 0.5 micron from hydrocarbon liquids such as jet fuels, diesel, gasoline, solvents, coolants, lubricating oils, hydraulic oils and processing fluidsSEE PRODUCT

• Certification
• ASME Section VIII Div. 1 and API Bulletin 1581
• Temperature
• -20°F/+150°F (-29°C/+66°C)
• Pressure
• 150 psig

WAL – LIQUID FILTER SEPARATOR (THREE STAGE HORIZONTAL)Engineered Products and Packages

The WAL Series Liquid Filter Separator provides water coalescing and filtration of hydrocarbon fuels, such as jet fuel, kerosene, diesel, gasoline and similar liquids, where greater efficiency of water removal is required. The WAL is a three-stage horizontal liquid filter separator. The first stage removes particulate and coalesces the water contaminant, while the second stage separates water droplets from the fuel. The third stage is an extra safeguard to absorb any remaining water.SEE PRODUCT

• Pore Sizes
• 1µm, 3µm, 5µm, 10µm, 20µm and 30µm
• Certification
• ANSI/NSF61
• Material
• 316 Stainless Steel and 304 Stainless Steel

XTL – FULFLO® XTL™ (EXTENDED LIFE) FILTER CARTRIDGEGeneral Cartridges

Technologically advanced wound cartridge design doubles cartridge life and improves performance. The unique construction of the patented* Fulflo® XTL™ (extended life) cartridges provides twice the average life of conventionally wound cartridges for process fluid filtration. Computer modeling has optimized the wound cartridge geometry maximizing the use of the internal cartridge surface area. The enhanced design provides improved dirt-holding capacity (twice the average) over standard wound cartridges, while providing true controlled-depth filtration. Fulflo® XTL cartridges are available in nominal (90%) ratings of 1µm, 3µm, 5µm, 10µm, 20µm and 30µm. Typical applications include potable liquids, organic solvents, process water, photoprocessing, lubricants, RO prefiltration, amines and chemical process.SEE PRODUCT