Van Cân Bằng Nhiệt Áp Tuần Hoàn P605

Van Cân Bằng Nhiệt Áp Tuần Hoàn P605

Thermostatic control valve for circulation lines according to DVGW Worksheet W551 and W553 for thermal control in 50-60 °C or 30-50 °C range.

Manufacturer: Clorius Controls

Description

Thermostatic control valve for circulation lines according to DVGW Worksheet W551 and W553 for thermal control in 50-60 °C or 30-50 °C range.
Our fitting is DIN-DVGW tested (50-60 °C) and ensures automatic thermal disinfection in temperature range T > 65 °C. This prevents the formation of legionella. The max. flow rate can be manually limited in compliance with the diagram using a separate valve cone.
Internal or male thread models.

Advantages:

+ Wetted parts made from corrosion-resistant red brass
+ Only two operating levels:
Drainage and thermometer readings combined
+ Incl. thermometer and insulation (optionally without)
+ Control accuracy of ± 2 K
+ Pre-adjust, control, shut-off using fitting
Technical data
hermostatic control valve for circulation lines according to DVGW Worksheet W551 and W553 for thermal control in 50-60 °C or 30-50 °C range.
Our fitting is DIN-DVGW tested (50-60 °C) and ensures automatic thermal disinfection in temperature range T > 65 °C. This prevents the formation of legionella. The max. flow rate can be manually limited in compliance with the diagram using a separate valve cone.
Internal or male thread models.
Advantages:
+ Wetted parts made from corrosion-resistant red brass
+ Only two operating levels:
Drainage and thermometer readings combined
+ Incl. thermometer and insulation (optionally without)
+ Control accuracy of ± 2 K
+ Pre-adjust, control, shut-off using fitting

Technical data

Permissible positive operating pressure PB 10 bar
Permissible operating temperature TB 90 °C
Flow medium: Domestic water according to Drinking Water Ordinance
Control accuracy: ± 2 K
Thermal disinfection: > 65 °C
Adjustable control range: 50 °C – 60 °C / 30 – 50 °C
Factory setting: approx. 57 °C
Housing: Red brass Rg according to DIN-EN 1982 and DIN 50930 Part 6
Headpiece and spindle: Brass according to DIN 50930 Part 6
Sealing elements: EPDM (KTW, W270 tested)
Insulation: EPP, building material class B2
DIN-DVGW tested

Catalogue

This browser does not support viewing PDFs. Please download the quotation to view it: Download Datasheet.

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *