Truyền Động Điện Cho Van-Electrical Valve Actuator AVM234

Valve Actuator AVM234
AVM 234S: 2500N Valve actuator with SUT positioner

How energy efficiency is improved

Automatic adaptation to valve, precision activation and high energy efficiency with minimal operating noise

Truyền Động Điện Cho Van-Electrical Valve Actuator AVM234
Truyền Động Điện Cho Van-Electrical Valve Actuator AVM234

Manufacturer: Clorius Controls


• Operation of 2-way or 3-way valves
• For controllers with constant output (0…10 V or 4…20 mA) or switching output (2-point or 3-point control)
• Stepping motor with Superior Universal Technology (SUT) electronic control unit and electronic, force-dependent cut-off
• Simple assembly with valve; spindle is automatically connected after control voltage is applied (patented system)
• Automatic detection of applied control signal (constant or switched); indicated by two LEDs
• Coding switches for selecting characteristic and running time
• Type of characteristic (linear/quadratic/equal-percentage) can be set on the actuator
• Automatic adaptation to the stroke of the valve (min. valve stroke 8 mm, max. valve stroke 49 mm). The measured stroke is saved and is not lost even in the event of a power failure
• Direction of operation can be selected via screw terminals when making the electrical connection
• Crank handle for external manual adjustment with motor cut-off and as trigger for a re-initialisation
• Power supply 230 V with module or direct connection for 24 V~ / 24 V=; continuous activation also admissible with 230 V
• Maintenance-free gear unit made of sintered steel; gearbox base-plate made of steel
• Mounting column made of stainless steel; mounting bracket made of cast light alloy for fitting the valve
• Electrical connections (max. 2.5 mm²) with screw terminals
• Three break-out cable inlets for M20 × 1.5 (2×) and M16 × 1.5
Fitting vertically upright to horizontal. Suspended is not recommended as condensate, dripping water, etc. must be prevented from entering the actuator along the valve spindle.


The electric actuator has been designed for
fitting on Clorius valves with lifting heights
up to 10 mm. See datasheets for valves.
The electric actuator is suitable for heating,
cooling, ventilation, industrial systems,
and such like. The electric actuator is
available either as a 3-point controlled
actuator or an analogue actuator, e.g. for
BMS systems.

Công ty TNHH Wili



Liện hệ: 0356 975 994 ( Jan Tran)

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *